Ariens Mower Repair in Simpson & Greenville, NC

Your Ariens is built tough — but when it goes down, you need a shop that knows the machine and tells you straight what it'll take to fix it. Rude Boy Small Engine Repair has been keeping outdoor power equipment running in eastern North Carolina for over 40 years. We service the full Ariens lineup, from walk-behind push mowers to commercial zero-turns, and we back every repair with a 30-day satisfaction guarantee. No runaround. No mystery charges. Just honest work done right.

Common Ariens Problems We Fix

We've seen it all. Here's what brings most Ariens owners through our door:

Hydraulic system issues on zero-turns (weak drive, pulling to one side, loss of power in the wheel motors)
Lap bar and steering arm problems (stiff, unresponsive, or misadjusted controls)
PTO and blade engagement failure (blades won't engage, PTO clutch slipping or burning out)
Carburetor gumming and fuel system clogs on walk-behind models (especially after sitting over winter)
Belt wear, stretch, and deck belt failure (squealing, slipping, or snapped drive and blade belts)
Battery and charging system faults (won't hold a charge, intermittent starting, dead after storage)
Engine oil leaks (valve cover gaskets, crankshaft seals, oil pan failures)
No-start after winter storage (stale fuel, gummed carb, corroded connections — we sort it all out)
Spindle assembly and blade damage (bent blades, worn spindle bearings, uneven cut)
Ignition and electrical gremlins (intermittent shutoff, safety switch failures, key switch issues)

Ariens Equipment We Service

We work on the full range of Ariens machines. If it's got an Ariens badge on it, bring it in.

Ikon series zero-turn mowers
Apex series zero-turn mowers
Edge series riding mowers
Compact riding mowers
Zoom series zero-turn mowers
Walk-behind push mowers (all engine configurations)
Walk-behind self-propelled mowers
Ariens Pro commercial zero-turns

Why Bring Your Ariens to Rude Boy?

We're not an authorized Ariens dealer — we're something better: an independent shop with 40+ years of hands-on mechanical experience, the certifications to back it up, and zero interest in selling you something you don't need. Here's why our customers keep coming back:

EXPERIENCE THAT COUNTS. Our owner has been turning wrenches on small engines since before most of our competitors were in business. John Deere certified. STIHL bronze certified. Coleman Preferred Vendor. 2024 and 2025 Nextdoor Neighborhood Faves. We've earned our reputation the hard way — one honest repair at a time.
STRAIGHT TALK ON DIAGNOSTICS. Our diagnostic fee is half an hour of labor — and it gets applied to your repair if you move forward. We tell you exactly what's wrong, what it'll cost, and whether the repair makes sense. No pressure. No surprises. If the machine isn't worth fixing, we'll tell you that too.
30-DAY SATISFACTION GUARANTEE. Every repair we perform is covered for 30 days. If something isn't right, we make it right. That's not a marketing line — it's how we've built this business.
WE COME TO YOU. Don't haul your zero-turn across town. We offer pickup and delivery throughout eastern NC. $105 within 10 miles, $4.50 per additional mile. Call and we'll schedule it.

Pricing and Diagnostics

Here's what to expect before you bring your Ariens in:

Diagnostic fee: Half-hour of labor, applied to your repair if you proceed
Labor rate: $105 for the first hour, $95/hr after
Tune-up pricing: Zero-Turn $245+, Ride-On $215+, Walk-Behind $80+
Pickup and delivery: $105 within 10 miles, $4.50/mile beyond that
Veterans, first responders, and seniors 65+: 10% off labor, 5% off full-service packages
30-day satisfaction guarantee on all repairs
Walk-ins welcome. No appointment needed.

We serve Simpson and the surrounding communities of eastern North Carolina, including: Greenville, Winterville, Grimesland, Chocowinity, Ayden, and nearby areas throughout Pitt County and beyond. Most pickups are within 15 to 20 minutes of the shop.

Your Ariens deserves better than sitting in a parking lot waiting three weeks for a chain shop to look at it. Bring it to Rude Boy — or better yet, let us come get it.

Rude by name. Reliable by nature.

Briggs & Stratton Engine Repair in Simpson, NC

Briggs & Stratton powers half the equipment in eastern North Carolina — and when it quits, you need someone who knows what they're doing. At Rude Boy Small Engine Repair, we've been fixing B&S engines for over 40 years. Lawn mowers, generators, pressure washers — if it's got a Briggs engine, we can fix it. Walk-ins welcome. No appointment. No runaround.

Common Briggs & Stratton Problems We Fix

Briggs & Stratton engines are tough, but they're not bulletproof. Here's what we see most:

Won't start — after sitting all winter or just out of nowhere
Surging or hunting engine — revving up and down, won't hold a steady idle
Carburetor problems — gummed up, clogged, or just plain done
Oil leaks — gaskets, seals, and everything in between
Blown head gaskets — more common than people think
Worn piston rings — burning oil, low compression, rough running
Bad ignition coils — no spark, no start, no good

Equipment We Service

Briggs & Stratton engines show up in a lot of places. We work on all of it:

Walk-behind lawn mowers
Riding mowers and zero-turn mowers
Portable generators
Pressure washers
Tillers and cultivators
Log splitters
Go-karts and mini bikes
And more — if it's got a B&S engine, we'll take a look

Why Bring Your Briggs & Stratton to Rude Boy?

Because we actually know what we're doing — and we'll be straight with you about what it costs and how long it takes.

40+ years of mechanical experience this isn't our first carburetor
Certified technicians John Deere and STIHL certified; we know engines
Fast turnaround most repairs done within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it can't be fixed, we'll dispose of it responsibly

Pricing & Diagnostics

We charge a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets applied to your total — so you're not paying twice. You'll get a written estimate before we touch anything, and we won't go a penny over it without your approval. Need it done fast? Add the $100 rush fee and your equipment moves to the front of the line.

We're based in Simpson, NC and serve customers across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't make it to us? We'll come to you. Pickup and delivery available for a flat $105 fee (up to 10 miles).

Stop fighting with a mower that won't start. Bring it in, call us, or schedule a pickup — we'll take it from there.

Rude by name. Reliable by nature.

Coleman Go-Kart & Mini Bike Repair in Simpson, NC

Coleman makes some of the most popular go-karts and mini bikes on the market — and Rude Boy Small Engine Repair is one of the few shops in eastern North Carolina that's an official Coleman Preferred Vendor. That means we're not just familiar with these machines — we're factory-recognized to work on them. Whether it's a CT200U that won't fire up or a KT196 that's seen better days, we've got you covered. Walk-ins welcome. No appointment. No drama.

Common Coleman Problems We Fix

Coleman go-karts and mini bikes are built for fun — but they take a beating. Here's what rolls through our shop most often:

Won't start — old fuel, flooded engine, bad spark plug, or a clogged carburetor
Carburetor issues — gummed up jets, rough idle, bogging under load, or fuel overflow
No drive or won't move — clutch wear, broken or slipping drive chain, or torque converter problems
Torque converter problems — worn belt, stuck weights, or a seized driver/driven pulley
Brake issues — worn brake pads, stretched cable, or a seized caliper
Engine overheating — clogged air filter, lean fuel mixture, or low oil
Electrical faults — kill switch failures, ignition coil issues, or wiring problems
Fuel leaks — cracked fuel lines, bad petcock, or a leaking carburetor float bowl
Throttle and governor issues — sticky throttle, stuck governor, or loss of top speed
Frame and hardware wear — loose bolts, worn bearings, and general wear from hard use

Coleman Equipment We Service

We work on the full Coleman Powersports lineup, including:

Mini bikes — CT200U, CT200U-EX, CT200U-AB, and more
Go-karts — KT196, CC100X, and the full Coleman Powersports kart lineup
Coleman generators — portable and dual-fuel models
Coleman pressure washers
Other Coleman Powersports equipment

Why Bring Your Coleman to Rude Boy?

Because not every shop knows these machines — and fewer still are authorized to work on them.

Coleman Preferred Vendor factory-recognized, not just self-proclaimed
Warranty work accepted we handle Coleman Powersports warranty claims
40+ years of mechanical experience go-karts and mini bikes are a specialty, not an afterthought
John Deere and STIHL certified we hold every repair to a high standard
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need it back sooner
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment, no hassle
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's beyond saving, we'll handle disposal responsibly

Parts & Accessories

We stock common Coleman parts including carburetors, drive belts, chains, spark plugs, air filters, and more. Need a specialty part? We'll order it. Customer-requested parts are paid upfront — everything else, we handle.

We're based in Simpson, NC and serve customers all across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and surrounding communities. Can't haul it in? We offer pickup and delivery for a flat $105 fee (up to 10 miles from our shop).

Don't let a broken go-kart or mini bike collect dust in the garage. Drop it off, give us a call, or schedule a pickup — we'll get it running right.

Rude by name. Reliable by nature.

Craftsman Mower Repair in Simpson, NC — Walk-Ins Welcome

Craftsman has been a staple in American garages for decades — and for good reason. But even the most dependable equipment needs a good mechanic eventually. At Rude Boy Small Engine Repair, we've been fixing Craftsman mowers, tillers, and outdoor power equipment for over 40 years. We know these machines like the back of our hand, and we'll have yours running again before the grass gets out of control. Walk-ins welcome. No appointment. No hassle.

Common Craftsman Problems We Fix

Craftsman equipment is reliable — until it isn't. Here's what lands on our workbench most often:

Won't start — sitting over winter, bad fuel, or a carburetor that's given up
Carburetor issues — gummed up, clogged, or flooding the engine
Belt problems — broken, stretched, or slipping drive and deck belts
Blade and spindle issues — dull or bent blades, worn spindle bearings, uneven cut
Electrical faults — bad ignition switches, safety seat sensors, or wiring issues
Hydrostatic transmission problems — won't move, slipping, or sluggish response
Oil leaks — valve cover gaskets, crankshaft seals, and more
Overheating — dirty air filters, low oil, or cooling fin blockages
Starter problems — recoil starter won't pull or electric starter won't engage

Equipment We Service

Craftsman makes a wide range of outdoor power equipment — we work on all of it:

Riding lawn tractors (T100, T200, T300 series)
Zero-turn mowers
Walk-behind push mowers
Self-propelled mowers
String trimmers and edgers
Leaf blowers
Tillers and cultivators
Pressure washers
And more — if it says Craftsman on it, we can fix it

Why Bring Your Craftsman to Rude Boy?

Because a good machine deserves a good mechanic — and we've got the experience and credentials to back it up.

40+ years of mechanical experience Craftsman has been a regular in our shop for decades
Certified technicians John Deere and STIHL certified; we know small engines inside and out
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's beyond repair, we'll handle disposal the right way

Pricing & Diagnostics

We start with a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets credited toward your total — so you're not paying for the diagnosis twice. You'll get a written estimate before we lift a wrench, and we won't go a cent over it without your approval first. Need it done fast? The $100 rush fee moves your Craftsman straight to the front of the line.

We're based in Simpson, NC and serve customers throughout eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't bring it to us? We'll come to you. Pickup and delivery available for a flat $105 fee (up to 10 miles from our shop).

Stop staring at a mower that won't start. Drop it off, give us a call, or schedule a pickup — we'll take it from there.

Rude by name. Reliable by nature.

Cub Cadet Mower Repair in Simpson, NC

Cub Cadet makes tough, capable equipment — but even the toughest machines need a good mechanic from time to time. At Rude Boy Small Engine Repair, we've been fixing Cub Cadet mowers and outdoor power equipment for over 40 years. We know these machines, we stock the parts, and we get them back to you running right. Walk-ins welcome. No appointment. No grief.

Common Cub Cadet Problems We Fix

Cub Cadet equipment is built to work hard — but hard work takes a toll. Here's what we see most:

Won't start — after sitting over winter or just refusing to fire up
Carburetor problems — gummed up fuel, clogged jets, rough or no idle
Belt and drive issues — worn, cracked, or snapped deck and drive belts
Blade and spindle problems — bent blades, bad bearings, scalping or uneven cut
Hydrostatic transmission issues — sluggish, jerky, or won't drive at all
Electrical faults — ignition switches, PTO switches, and safety sensor failures
Oil leaks — gaskets, seals, and crankcase issues
Overheating — clogged cooling fins, low oil, or a failing head gasket
Steering problems — loose, stiff, or pulling to one side

Equipment We Service

Cub Cadet builds a full lineup of outdoor power equipment — we work on all of it:

Zero-turn mowers (Ultima ZT, Ultima ZTX series)
Riding lawn tractors (XT1, XT2 series)
Walk-behind push mowers
Self-propelled mowers
String trimmers and edgers
Leaf blowers
Tillers and cultivators
And more — if it's got a Cub Cadet badge, bring it in

Why Bring Your Cub Cadet to Rude Boy?

Because you didn't buy a Cub Cadet to have it sit broken in the shed. We'll get it back where it belongs — in the yard, doing its job.

40+ years of mechanical experience Cub Cadet is no stranger to our shop
Certified technicians John Deere and STIHL certified; we know what proper repair looks like
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's not worth fixing, we'll dispose of it responsibly

Pricing & Diagnostics

We start with a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets applied to your total — no paying twice. You'll get a written estimate before we start any work, and we won't go a penny over it without your say-so. Need it back fast? Add the $100 rush fee and your Cub Cadet moves straight to the front of the line.

We're based in Simpson, NC and serve customers all across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't haul it in? No problem — we offer pickup and delivery for a flat $105 fee (up to 10 miles from our shop).

Don't let a broken mower win. Drop it off, give us a call, or schedule a pickup — we'll handle the rest.

Rude by name. Reliable by nature.

ECHO Equipment Repair in Simpson & Greenville, NC

ECHO makes some of the hardest-working handheld equipment on the market — and the people who use it don't mess around. Whether you're a homeowner keeping your yard clean or a landscaper running ECHO gear all day long, you need it working. Not tomorrow. Now. When your ECHO trimmer, blower, chainsaw, or hedge trimmer goes down, Rude Boy Small Engine Repair gets it back in your hands fast. We've worked on ECHO equipment for years and know exactly what these machines need — from a simple carb clean to a full rebuild.

Common ECHO Problems We Fix

String trimmers: Carburetor clogs, fuel line replacements, primer bulb failures, head and line issues, no-start after sitting
Backpack & handheld blowers: Carburetor rebuilds, air filter replacements, ignition coil failures, fuel system service
Chainsaws: Chain and bar replacements, carburetor cleans, oiler system repairs, compression issues, starter rope and recoil repairs
Hedge trimmers: Blade sharpening and replacements, gear drive issues, carburetor service
Pole saws: Bar and chain service, carburetor clogs, drive shaft issues
Bed redefiners & edgers: Blade replacements, carburetor service, general tune-ups

ECHO Models We Service

ECHO SRM series (SRM-225, SRM-2620, SRM-3020)
ECHO PB series blowers (PB-580, PB-770, PB-9010)
ECHO CS series chainsaws (CS-310, CS-400, CS-590, CS-800P)
ECHO HC series hedge trimmers
ECHO PPT series pole saws
ECHO BRD series bed redefiners
ECHO GT series edgers
Older and discontinued ECHO models — if it's got a small engine, we'll take a look

Why Bring Your ECHO to Rude Boy?

We know 2-stroke engines cold. ECHO runs almost entirely on 2-stroke power — and that's our wheelhouse. Carb issues, fuel mix problems, compression loss — we've seen it all and fixed it all.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. Written estimate before we touch a thing — no surprises, no upsells you didn't ask for.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. Can't wait? Our $100 rush service moves you to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. No truck, no trailer, no problem.
30-day satisfaction guarantee. Every repair, every time. If something's not right, we make it right.

Serving Eastern North Carolina

We're based in Simpson, NC and proudly serve Greenville, Winterville, Ayden, Grimesland, Chocowinity, and surrounding communities across eastern NC. Commercial landscapers welcome — we keep your crew running.

Final pricing depends on parts and labor. You approve the estimate before work begins — always.

Get Your ECHO Back in Action

Rude by name. Reliable by nature.

eXmark Mower Repair in Simpson & Greenville, NC

eXmark builds some of the most respected commercial mowers on the market — and the landscapers and property owners who run them expect nothing less than peak performance. When an eXmark goes down, every hour it sits is money out of your pocket. Rude Boy Small Engine Repair knows eXmark equipment. From the Lazer Z zero-turn to the Quest and Radius series, we diagnose fast, repair right, and get you back on the job. No runaround. No unnecessary parts. Just honest work from a shop that knows what it's doing.

Common eXmark Problems We Fix

Zero-turn mowers: Hydrostatic transmission issues, deck belt and spindle failures, blade sharpening, carburetor clogs, PTO clutch failures, no-start after sitting
Riding mowers: Steering and drive issues, battery and charging failures, fuel system service, full-service tune-ups
Stand-on mowers: Drive system repairs, deck and blade service, belt replacements, carburetor service
Walk-behind mowers: Self-propel drive failures, belt and blade replacements, carburetor rebuilds, general tune-ups
Engine service: Kawasaki, Kohler, and Briggs & Stratton engine repairs across the eXmark lineup

eXmark Models We Service

eXmark Lazer Z series (X-Series, E-Series, S-Series)
eXmark Radius series
eXmark Quest series
eXmark Vantage stand-on mowers
eXmark Turf Tracer series
eXmark Viking series
eXmark Metro series
eXmark Commercial 30 walk-behind
Older and discontinued eXmark models — if it cuts grass, we can fix it

Why Bring Your eXmark to Rude Boy?

We work on commercial equipment. eXmark is built for professionals — and so are we. We don't shy away from complex repairs or high-hour machines. If it can be fixed, we'll fix it.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. Written estimate before we touch a thing — no surprises, no upsells you didn't ask for.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. Can't afford to wait? Our $100 rush service moves you straight to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. Perfect for landscaping crews who can't spare the downtime.
30-day satisfaction guarantee. Every repair, every time. If something's not right, we make it right.

Serving Eastern North Carolina

Final pricing depends on parts and labor. You approve the estimate before work begins — always.

Get Your eXmark Back on the Job

Rude by name. Reliable by nature.

Ferris Mower Repair in Simpson & Greenville, NC

Ferris is known for one thing above all else — the ride. Their patented suspension system is what sets them apart from every other zero-turn on the market, and the landscapers and property owners who run them swear by it. But suspension or not, every machine eventually needs service. When your Ferris needs attention, Rude Boy Small Engine Repair is ready. From the IS 700Z and IS 3200Z to the SRS Z3X stand-on, we know the Ferris lineup and we know what these machines need to keep running at their best. Bring it in or let us come to you.

Common Ferris Problems We Fix

Zero-turn mowers: Hydrostatic transmission failures, suspension system service, deck belt and spindle replacements, blade sharpening, carburetor and fuel system service, PTO clutch issues, no-start diagnostics
Stand-on mowers: Drive system repairs, deck and blade service, belt replacements, engine service
Walk-behind mowers: Belt and blade replacements, self-propel drive failures, carburetor rebuilds, general tune-ups
Engine service: Kawasaki, Kohler, Briggs & Stratton Vanguard, and Yamaha engine repairs across the Ferris lineup
Hydraulic system service: Pump and wheel motor diagnostics, fluid service, drive pull issues

Ferris Models We Service

Ferris IS 700Z
Ferris IS 2100Z
Ferris IS 3200Z
Ferris ISX 800 & ISX 3300
Ferris F160Z & F320Z
Ferris SRS Z1 & SRS Z2 stand-on series
Ferris SRS Z3X
Ferris 400S & 500S walk-behind series
Older and discontinued Ferris models — high-hour and legacy machines welcome

Why Bring Your Ferris to Rude Boy?

We respect the engineering. Ferris machines aren't your average zero-turn — the suspension system adds complexity that not every shop is comfortable with. We are. We diagnose the full machine, not just the obvious stuff.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. Written estimate before we touch a thing — no surprises, no unnecessary parts.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. Can't wait? Our $100 rush service moves you straight to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. No trailer needed. We handle the logistics so you can stay on the job.
30-day satisfaction guarantee. Every repair, every time. If something's not right, we make it right.

Pricing

Diagnostic Fee — Half hour of labor (applied to repair if you move forward)
Zero-Turn Full Service — $245+
Walk-Behind Full Service — $80+
Rush Service — +$100 (moves you to the front of the line)
Pickup & Delivery — $105 flat for up to 10 miles

We're based in Simpson, NC and proudly serve Greenville, Winterville, Ayden, Grimesland, Chocowinity, and surrounding communities across eastern NC. Residential owners and commercial landscaping crews both welcome — if you run Ferris, you already know quality. So do we.

Get Your Ferris Running Again

Rude by name. Reliable by nature.

Generac Generator Repair in Simpson, NC

When the power goes out, your Generac is supposed to be the one thing that keeps working. So when it doesn't start, runs rough, or throws an error code — that's a problem. At Rude Boy Small Engine Repair, we diagnose and fix Generac generators fast, so you're not left in the dark when the next storm rolls through. Over 40 years of experience, honest estimates, and no appointment needed. Walk-ins welcome.

Common Generac Problems We Fix

Generators sit for months at a time and then get called into action at the worst possible moment. Here's what we see most:

Won't start — stale fuel, clogged carburetor, or a dead battery after months of sitting
Carburetor problems — gummed up jets, rough idle, surging, or running rich/lean
Low or no power output — AVR (automatic voltage regulator) issues, load problems, or engine faults
Runs but shuts off — low oil shutoff triggers, overheating, or fuel starvation
Hard starting — weak spark, compression issues, or choke problems
Oil leaks — gaskets, seals, and crankcase issues
Error codes and fault lights — diagnostic readout, sensor failures, or control board issues
Fuel system failures — clogged fuel filters, cracked fuel lines, or bad primer bulbs
Battery and charging issues — dead battery, bad charging circuit, or corroded connections
Overheating — clogged cooling fins, low oil, or blocked airflow

Generac Equipment We Service

We work on a wide range of Generac generator models, including:

Portable generators (GP, GP Series II, XC series)
Dual-fuel generators (GP DF series)
Portable power stations (engine-based models)
Pressure washers with Generac engines
And more — if it's got a Generac engine, bring it in

Why Bring Your Generac to Rude Boy?

Because a generator that doesn't work when the power's out is just an expensive paperweight.

40+ years of mechanical experience we've seen every generator problem in the book
Certified technicians John Deere and STIHL certified; we hold our repairs to a high standard
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available because sometimes a storm doesn't wait
Pickup & delivery flat $105 fee up to 10 miles from our shop (generators are heavy — let us come to you)
Walk-ins welcome no appointment, no scheduling headaches
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's beyond repair, we'll dispose of it responsibly

Don't Wait Until the Next Storm

Eastern North Carolina knows what hurricane season looks like. Power outages aren't a question of if — they're a question of when. The worst time to find out your generator needs a repair is when you're sitting in the dark. Bring your Generac in for a tune-up before peak season hits. We'll check the carburetor, spark plug, oil, air filter, fuel system, and battery — so when the lights go out, yours stay on.

We're based in Simpson, NC and serve customers all across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and surrounding communities. Generator too heavy to haul in? No problem — we offer pickup and delivery for a flat $105 fee (up to 10 miles from our shop).

Don't gamble on it. Drop it off, give us a call, or schedule a pickup — we'll make sure it's ready before you need it.

Rude by name. Reliable by nature.

Gravely Mower Repair in Simpson & Greenville, NC

Gravely has been building serious mowing equipment since 1916 — over a century of tough, reliable machines trusted by homeowners and commercial operators alike. When you own a Gravely, you expect it to perform. And when it doesn't, you need a shop that takes it just as seriously as you do. Rude Boy Small Engine Repair services Gravely equipment across the full lineup. From the Pro-Turn and Pro-Turn EV zero-turns to the Pro-Stance stand-on and Pro-Walk series, we know these machines and we know what breaks on them. Bring it in or let us come get it — we'll have it back in action fast.

Common Gravely Problems We Fix

Zero-turn mowers: Hydrostatic transmission failures, deck belt and spindle replacements, blade sharpening, carburetor and fuel system service, PTO clutch issues, no-start diagnostics
Stand-on mowers: Drive system repairs, deck and blade service, belt replacements, engine service
Walk-behind mowers: Belt and blade replacements, self-propel drive failures, carburetor rebuilds, general tune-ups
Engine service: Kawasaki, Kohler, and Briggs & Stratton Vanguard engine repairs across the Gravely lineup
Hydraulic system service: Pump and wheel motor diagnostics, fluid service, drive pull issues

Gravely Models We Service

Gravely Pro-Turn 200 / 400 / 600
Gravely Pro-Turn EV (electric zero-turn)
Gravely Pro-Turn Mach One
Gravely Pro-Stance stand-on series
Gravely Pro-Walk series
Gravely ZT HD series
Gravely ZT X series
Gravely Compact-Pro series
Gravely Atlas JSV utility vehicles
Older and discontinued Gravely models — high-hour and legacy machines welcome

Why Bring Your Gravely to Rude Boy?

A century-old brand deserves experienced hands. Gravely has been refining their machines for over 100 years — and we bring 40+ years of mechanical experience to every repair. We've seen the evolution of these machines and know them inside and out.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. Written estimate before we touch a thing — no surprises, no unnecessary parts.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. Can't wait? Our $100 rush service moves you straight to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. No trailer needed. We handle the logistics so you can focus on the job.
30-day satisfaction guarantee. Every repair, every time. If something's not right, we make it right.

Pricing

Diagnostic Fee — Half hour of labor (applied to repair if you move forward)
Zero-Turn Full Service — $245+
Walk-Behind Full Service — $80+
Rush Service — +$100 (moves you to the front of the line)
Pickup & Delivery — $105 flat for up to 10 miles

Get Your Gravely Running Again

Rude by name. Reliable by nature.

Honda Small Engine Repair in Simpson, NC

Honda builds some of the most reliable small engines in the world — but even the best engines need service eventually. At Rude Boy Small Engine Repair, we've been working on Honda-powered equipment for over 40 years. Walk-behind mowers, generators, pressure washers — if it's got a Honda engine, we can fix it. Walk-ins welcome. No appointment. No runaround.

Common Honda Problems We Fix

Honda engines are known for their reliability — but age, hard use, and sitting over winter all take their toll. Here's what we see most:

Won't start — after storage, bad fuel, or a carburetor that's given up
Carburetor problems — gummed up, clogged jets, rough idle
Self-propel failures on walk-behind mowers
Oil leaks — gaskets, seals, and valve cover issues
Overheating — clogged cooling fins, low oil
Ignition and spark issues — bad coil, fouled plug, no fire
Fuel system failures — clogged filters, cracked lines, bad primer bulbs

Honda Equipment We Service

We work on Honda-powered equipment across the board:

Walk-behind push mowers (HRX, HRN, HRR series)
Self-propelled walk-behind mowers
Portable generators (EU, EB, EM series)
Pressure washers
Tillers and cultivators
And more — if it's got a Honda engine, bring it in

Why Bring Your Honda to Rude Boy?

Because Honda reliability deserves Honda-quality repair. We know these engines and we'll have yours running right.

40+ years of mechanical experience Honda has been in our shop more times than we can count
Certified technicians John Deere and STIHL certified; we know what quality repair looks like
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off

Pricing & Diagnostics

We charge a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets applied to your total — no double-dipping. You'll get a written estimate before we touch a thing, and we won't go over it without your approval.

We're based in Simpson, NC and serve customers all across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't haul it in? We'll come to you. Pickup and delivery available for a flat $105 fee (up to 10 miles from our shop).

Don't let good equipment collect dust. Drop it off, give us a call, or schedule a pickup — we'll handle the rest.

Rude by name. Reliable by nature.

Husqvarna Mower & Outdoor Equipment Repair in Simpson, NC

Husqvarna makes serious equipment for serious work — and when it goes down, you need a shop that can handle it. At Rude Boy Small Engine Repair, we've been wrenching on Husqvarna mowers, chainsaws, and outdoor power equipment for over 40 years. We know these machines, we stock common parts, and we get them back to you fast. Walk-ins welcome. No appointment. No drama.

Common Husqvarna Problems We Fix

Husqvarna equipment is built tough, but nothing lasts forever without a little attention. Here's what we see coming through the door most often:

Won't start — after storage, bad fuel, or just out of nowhere
Carburetor problems — clogged jets, gummed up fuel passages, rough idle
Belt and drive issues — worn, cracked, or broken deck and drive belts
Blade and spindle problems — bent blades, bad spindle bearings, uneven cut
Hydrostatic transmission issues — sluggish, slipping, or won't move
Ignition and electrical faults — bad coils, switches, or safety sensors
Oil leaks — gaskets, seals, and crankcase issues
Overheating — clogged air filters, low oil, or cooling system problems
Chainsaw issues — won't start, chain brake problems, bar and chain wear

Equipment We Service

Husqvarna makes a wide range of outdoor power equipment — we work on all of it:

Zero-turn mowers (Z200, Z400, Z500 series)
Riding lawn tractors (100, 200, 400 series)
Walk-behind mowers
Chainsaws (gas-powered)
String trimmers and brush cutters
Leaf blowers and handheld equipment
Pressure washers
And more — if it's got a Husqvarna badge, bring it in

Why Bring Your Husqvarna to Rude Boy?

Because Husqvarna deserves better than a shop that's guessing. We've got the experience, the parts, and the know-how to do it right.

40+ years of mechanical experience Husqvarna has been in our shop more times than we can count
Certified technicians John Deere and STIHL certified; we know what quality repair looks like
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's not worth fixing, we'll take care of disposal

Pricing & Diagnostics

We kick things off with a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets applied to your total — no double-dipping. You'll get a written estimate before we touch a thing, and we won't go over it without your approval. Need it back in a hurry? The $100 rush fee puts your Husqvarna at the front of the line.

We're based in Simpson, NC and serve customers all across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't haul it in? We'll come to you. Pickup and delivery available for a flat $105 fee (up to 10 miles from our shop).

Don't let good equipment collect dust. Drop it off, give us a call, or schedule a pickup — we'll handle the rest.

Rude by name. Reliable by nature.

Certified John Deere Mower Repair in Simpson, NC

John Deere builds some of the toughest equipment on the market — but even the best machines break down. When yours does, you want someone who actually knows John Deere inside and out. At Rude Boy Small Engine Repair, we're certified John Deere technicians with 40+ years of mechanical experience. We've seen every problem these machines can throw at us, and we fix them right the first time. Walk-ins welcome. No appointment needed. No nonsense.

Common John Deere Problems We Fix

John Deere equipment is built to last — but age, hard use, and sitting over winter all take their toll. Here's what we deal with most:

Won't start — dead after winter storage or just stopped mid-mow
Deck and blade issues — bent blades, worn spindles, uneven cut
Belt problems — broken, slipping, or worn drive and deck belts
Carburetor issues — gummed up fuel, rough idle, hard starting
Electrical problems — bad ignition switches, safety switches, and wiring
Transmission issues — hydrostatic drive slipping or not engaging
Oil leaks — seals, gaskets, and valve cover issues
Overheating — clogged cooling fins, low oil, or head gasket failure
PTO problems — blades won't engage or disengage properly

Equipment We Service

We work on the full John Deere lineup of outdoor power equipment, including:

Zero-turn mowers (Z300, Z500, Z700 series)
Riding lawn tractors (100, 200, X300, X500, X700 series)
Walk-behind mowers
Compact utility tractors (small engine models)
Gators and utility vehicles
Chainsaws and handheld equipment
And more — if it's green and yellow, bring it in

Why Bring Your John Deere to Rude Boy?

Because certified matters. Anyone can call themselves a repair shop — not everyone has the training, tools, and experience to back it up.

John Deere certified technicians trained and credentialed, not just experienced
40+ years of mechanical experience we've worked on John Deere longer than some shops have been open
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available to move your equipment to the front of the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off
Eco-friendly recycling if it's beyond saving, we'll handle disposal responsibly

Pricing & Diagnostics

We start with a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee gets applied to your total — you're not paying for the diagnosis on top of the fix. You'll get a written estimate before any work begins, and we won't go a penny over it without your say-so. Need it back fast? The $100 rush fee moves your John Deere straight to the front of the line.

We're located in Simpson, NC and proudly serve customers throughout eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and the surrounding communities. Can't load it up and haul it in? No problem — we offer pickup and delivery for a flat $105 fee (up to 10 miles from our shop).

Don't let a broken mower sit in the garage all season. Bring it in, give us a call, or schedule a pickup — we'll get it sorted.

Rude by name. Reliable by nature.

SCAG Mower Repair in Simpson & Greenville, NC

SCAG is the gold standard for commercial mowing — built tough, engineered to run hard, and trusted by landscaping professionals across the country. If you're running SCAG equipment, you already know quality. And when it needs service, you need a shop that matches that standard. Rude Boy Small Engine Repair works on SCAG equipment regularly. From the Turf Tiger and Cheetah zero-turns to the V-Ride and Stander stand-ons, we know what these machines need to perform at their best. We don't cut corners on commercial equipment — and neither does SCAG.

Common SCAG Problems We Fix

Zero-turn mowers: Hydrostatic transmission failures, deck belt and spindle replacements, blade replacement, carburetor and fuel system service, PTO clutch issues, no-start diagnostics
Stand-on mowers: Drive system repairs, deck and blade service, belt replacements, engine service
Walk-behind mowers: Belt and blade replacements, self-propel drive failures, carburetor rebuilds, general tune-ups
Engine service: Kawasaki, Kohler, Briggs & Stratton, and Vanguard engine repairs across the SCAG lineup
Hydraulic system service: Pump and wheel motor diagnostics, fluid service, drive issues

SCAG Models We Service

SCAG Turf Tiger II
SCAG Cheetah & Cheetah II
SCAG Tiger Cat II
SCAG Freedom Z
SCAG Patriot
SCAG V-Ride II
SCAG Stander
SCAG Cougar
SCAG SW & SWZ walk-behind series
Older and discontinued SCAG models — high-hour machines welcome

Why Bring Your SCAG to Rude Boy?

We don't shy away from commercial machines. SCAG equipment runs hard and gets used hard. High hours, tough conditions, demanding schedules — we understand what commercial equipment goes through and we repair it accordingly.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. Written estimate before we touch a thing — no surprises, no unnecessary parts.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. When your crew is sitting idle, that's not good enough — ask about our $100 rush service to move straight to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. Ideal for landscaping operations that can't spare a truck and trailer for a shop run.
30-day satisfaction guarantee. Every repair, every time. If something's not right, we make it right.

Serving Eastern North Carolina

We're based in Simpson, NC and proudly serve Greenville, Winterville, Ayden, Grimesland, Chocowinity, and surrounding communities across eastern NC. If your landscaping business runs on SCAG, we're the shop that keeps it running.

Final pricing depends on parts and labor. You approve the estimate before work begins — always.

Get Your SCAG Back on the Job

Rude by name. Reliable by nature.

STIHL Chainsaw & Equipment Repair in Simpson, NC

STIHL builds some of the toughest outdoor power equipment on the planet. And we're one of the few shops in eastern North Carolina with a STIHL bronze certification to prove we know how to work on it. At Rude Boy Small Engine Repair, we don't just guess at STIHL repairs — we've been trained on them. Walk-ins welcome. No appointment. No runaround.

Common STIHL Problems We Fix

STIHL equipment is built to last — but even the best gear needs a good wrench from time to time. Here's what comes through our door most often:

Won't start — flooded, fouled plug, bad ignition module, or fuel system issues
Carburetor problems — gummed up from old fuel, rough idle, bogging under load
Chain and bar issues — dull chains, worn bars, improper tension, oiler problems
Fuel system failures — clogged fuel filters, cracked fuel lines, bad primer bulbs
Ignition and spark problems — weak spark, bad coil, or no fire at all
Overheating — clogged air filters, cooling fin blockage, lean fuel mixture
Clutch and sprocket wear — slipping clutch, worn sprocket, chain engagement issues
Blower and trimmer problems — loss of power, vibration, line feed issues
Throttle and trigger issues — sticky, unresponsive, or stuck at full throttle

STIHL Equipment We Service

STIHL makes more than just chainsaws — and we work on the full lineup:

Chainsaws (MS series — homeowner and professional grade)
Battery-powered chainsaws (MSA series)
Gas and battery string trimmers (FS series)
Backpack and handheld blowers (BR, BG series)
Hedge trimmers (HS series)
Cut-off saws and concrete saws (TS series)
Pole pruners and extended reach tools
Pressure washers
And more — if it's orange and says STIHL, we can work on it

Why Bring Your STIHL to Rude Boy?

Because STIHL equipment deserves a technician who actually knows what they're doing — not someone who's just going to poke at it and hope for the best.

STIHL bronze certified factory-trained, not just self-taught
40+ years of mechanical experience we've seen it all
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need it done yesterday
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment, no hassle
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just say so at drop-off
Eco-friendly recycling if it's beyond saving, we'll handle disposal responsibly

Pricing & Diagnostics

We charge a diagnostic fee equal to half an hour of labor. If you move forward with the repair, that fee goes toward your total — you're not paying for the diagnosis twice. You'll get a written estimate before any work starts, and we won't go over it without your approval. In a hurry? The $100 rush fee moves your STIHL straight to the front of the line.

We're based in Simpson, NC and serve customers across eastern North Carolina, including: Simpson · Greenville · Winterville · Grimesland · Chocowinity · Ayden and surrounding communities. Can't bring it in? We offer pickup and delivery for a flat $105 fee (up to 10 miles from our shop).

Don't let a sick saw slow you down. Drop it off, give us a call, or schedule a pickup — we'll take it from there.

Rude by name. Reliable by nature.

Toro Equipment Repair in Simpson & Greenville, NC

TORO builds tough equipment — zero-turn mowers, riding mowers, and walk-behinds that are built to last. But even the toughest machines break down eventually. When yours does, don't let it sit in the garage collecting dust. Rude Boy Small Engine Repair has been fixing TORO equipment for years. We know these machines inside and out — from the TORO TimeCutter and Titan zero-turns to the Recycler and Personal Pace walk-behinds. If it's got a TORO badge on it, we can fix it.

Common TORO Problems We Fix

Zero-turn mowers: Hydrostatic transmission issues, deck belt replacements, spindle assembly failures, blade sharpening, carburetor clogs, no-start after sitting
Riding mowers: PTO clutch problems, steering issues, battery and charging failures, fuel system clogs, full-service tune-ups
Walk-behind mowers: Carburetor rebuilds, self-propel drive failures, blade and belt replacements, oil changes

TORO Models We Service

TORO TimeCutter zero-turn series
TORO Titan zero-turn series
TORO Recycler walk-behind mowers
TORO Personal Pace walk-behind mowers
TORO riding lawn tractors
Plus older and discontinued models — if it runs on a small engine, bring it in

Why Bring Your TORO to Rude Boy?

40+ years of mechanical experience. We've seen every TORO problem in the book — and a few that aren't. No guessing, no unnecessary parts, no runaround.

Honest diagnostics. Our diagnostic fee is half an hour of labor, and it goes straight toward your repair if you move forward. You'll get a written estimate before we touch a thing — no surprises.
Fast turnaround. Most repairs are ready within 2 weeks of drop-off. Need it sooner? Our $100 rush service bumps you to the front of the line.
We come to you. Pickup and delivery available — flat $105 for up to 10 miles from our shop. No trailer needed.
30-day satisfaction guarantee. Every repair we do is backed by it. Period.

Serving Eastern North Carolina

We're based in Simpson, NC and proudly serve Greenville, Winterville, Ayden, Grimesland, Chocowinity, and surrounding communities in eastern NC. Drop it off, or let us come get it.

Final pricing depends on parts and labor. You approve the estimate before work begins — always.

Get Your TORO Running Again

Rude by name. Reliable by nature.

Troy-Bilt Mower Repair in Simpson, NC

Troy-Bilt has been a trusted name in outdoor power equipment for decades — lawn tractors, walk-behind mowers, tillers, and more. At Rude Boy Small Engine Repair, we've been fixing Troy-Bilt equipment for over 40 years. We know these machines, and we'll have yours running again fast. Walk-ins welcome. No appointment. No hassle.

Common Troy-Bilt Problems We Fix

Here's what we see most often on Troy-Bilt equipment:

Won't start — sitting over winter, bad fuel, or a carburetor that's given up
Carburetor issues — gummed up, clogged, or flooding the engine
Belt problems — broken, stretched, or slipping drive and deck belts
Blade and spindle issues — dull or bent blades, worn spindle bearings, uneven cut
Hydrostatic transmission problems — won't move, slipping, or sluggish response
Electrical faults — bad ignition switches, safety seat sensors, or wiring issues
Oil leaks — valve cover gaskets, crankshaft seals, and more
Tiller and cultivator issues — tine wear, gear box problems, belt replacements

Troy-Bilt Equipment We Service

Troy-Bilt makes a wide range of outdoor power equipment — we work on all of it:

Riding lawn tractors (Bronco, Pony, Super Bronco series)
Zero-turn mowers
Walk-behind push mowers
Self-propelled mowers
Tillers and cultivators
String trimmers and edgers
Leaf blowers
And more — if it says Troy-Bilt on it, we can fix it

Why Bring Your Troy-Bilt to Rude Boy?

Because a good machine deserves a good mechanic — and we've got the experience and credentials to back it up.

40+ years of mechanical experience Troy-Bilt has been a regular in our shop for decades
Certified technicians John Deere and STIHL certified; we know small engines inside and out
Fast turnaround most repairs completed within 2 weeks
$100 rush fee available if you need to jump the line
Pickup & delivery flat $105 fee up to 10 miles from our shop
Walk-ins welcome no appointment needed, ever
30-day satisfaction guarantee on all work performed
Discounts for veterans, first responders, and seniors (65+) just mention it at drop-off

Pricing & Diagnostics

Stop staring at a mower that won't start. Drop it off, give us a call, or schedule a pickup — we'll take it from there.

Rude by name. Reliable by nature.

Kawasaki Engine Repair in Simpson & Greenville, NC

Kawasaki engines are known for their power and durability — but even the toughest engines need expert attention when something goes wrong. Rude Boy Small Engine Repair has been servicing Kawasaki-powered equipment in eastern North Carolina for over 40 years. Whether it's a commercial zero-turn, a walk-behind, or a stand-on mower powered by a Kawasaki FX, FR, or FS series engine, we know these machines inside and out. Honest diagnostics, fair pricing, and a 30-day satisfaction guarantee on every repair.

Common Kawasaki Engine Problems We Fix

Kawasaki engines are workhorses, but here's what brings most owners in:

Oil consumption and burning oil (worn rings, valve seals, or breather issues)
Hard starting or no-start conditions (carburetor, ignition, or compression issues)
Overheating due to clogged cooling fins or low oil
Surging or rough running at idle or under load
Valve train noise, bent pushrods, or worn camshaft lobes
Carburetor flooding, fuel delivery problems, or stale fuel damage
Ignition coil failure and spark plug fouling
Oil leaks from gaskets, seals, or the crankcase

Kawasaki-Powered Equipment We Service

We work on a wide range of equipment powered by Kawasaki engines:

Zero-turn mowers (commercial and residential)
Walk-behind and self-propelled mowers
Stand-on mowers
Riding lawn tractors
Kawasaki FX, FR, FS, FJ, and FC series engines
Pressure washers and generators with Kawasaki engines
Commercial turf equipment

Why Rude Boy for Kawasaki Repairs?

We're not a dealership — we're a shop that actually fixes things:

Engine specialists: We work on Kawasaki engines daily across dozens of equipment brands.
Honest diagnostics: We tell you exactly what's wrong and what it'll cost before we touch it.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: Can't haul it in? We'll come get it and bring it back when it's done.
No mystery charges: Flat, transparent pricing with no surprises at pickup.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward the cost of repair if you proceed. Most engine repairs run $85–$250 depending on parts and labor.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Valve adjustment or replacement: $75–$150 + parts
Full tune-up on Kawasaki engine: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Kawasaki-powered equipment to Rude Boy and we'll get it running right — or we'll tell you honestly if it's not worth fixing.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Kohler Engine Repair in Simpson & Greenville, NC

Kohler engines power some of the most popular riding mowers and zero-turns on the market — and when they need work, you want a shop that knows them well. Rude Boy Small Engine Repair has been servicing Kohler-powered equipment in eastern North Carolina for over 40 years. From the Command Pro series to the Courage and Confidant lines, we diagnose and repair Kohler engines fast, with honest pricing and a 30-day satisfaction guarantee.

Common Kohler Engine Problems We Fix

Here's what brings most Kohler owners through our door:

Oil leaks from the valve cover, crankshaft seal, or head gasket
Hard starting, backfiring, or no-start conditions
Surging at idle — common on Kohler carbureted engines
Overheating due to blocked cooling fins or low oil pressure
Carburetor issues including flooding, gumming, and fuel delivery failure
Ignition module failure and coil problems
Valve train wear, bent pushrods, and compression loss
EFI system faults on Kohler EFI-equipped engines

Kohler-Powered Equipment We Service

We service equipment powered by the full Kohler engine lineup:

Riding lawn tractors and zero-turn mowers
Walk-behind and self-propelled mowers
Kohler Command, Command Pro, and Confidant series engines
Kohler Courage and Courage Pro single-cylinder engines
Kohler EFI (electronic fuel injection) engines
Generators and pressure washers with Kohler engines
Commercial turf and grounds equipment

Why Rude Boy for Kohler Repairs?

We've been fixing Kohler engines longer than most shops have been open:

Deep Kohler experience: We've worked on every major Kohler engine series.
Straight diagnosis: We tell you what's wrong and what it costs before we start.
30-day guarantee: All repairs backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
No upselling: We only recommend what your machine actually needs.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed. Most Kohler engine repairs run $75–$250 depending on the issue.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Head gasket replacement: $120–$200 + parts
Full tune-up on Kohler engine: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Drop off your Kohler-powered equipment or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Snapper Mower Repair in Simpson & Greenville, NC

Snapper has been making dependable lawn mowers for decades, and Rude Boy Small Engine Repair has been fixing them just as long. Whether you've got a classic rear-engine rider, a walk-behind push mower, or a newer Snapper riding tractor, we service the full lineup right here in Simpson, NC. Honest work, fair prices, and a 30-day satisfaction guarantee on every repair.

Common Snapper Problems We Fix

Here's what brings most Snapper owners through our door:

Rear-engine rider drive issues — belt slipping, worn friction disc, or no self-propel
Deck engagement problems — PTO clutch failure or belt wear
Hard starting or no-start (carburetor, ignition, or compression)
Uneven cut or scalping from worn or bent blades
Transmission slipping or loss of drive on riding models
Carburetor flooding, surging, or fuel delivery issues
Deck spindle bearing failure and blade wobble
Steering problems on rear-engine and front-engine riders

Snapper Equipment We Service

We work on the full Snapper lineup:

Snapper rear-engine riding mowers
Snapper front-engine riding tractors
Snapper walk-behind push mowers
Snapper self-propelled mowers
Snapper zero-turn mowers
Snapper cordless and electric mowers

Why Rude Boy for Snapper Repairs?

We know Snapper equipment and we'll give you a straight answer:

Snapper specialists: We've worked on Snapper mowers for decades, including the classic rear-engine riders.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Snapper and return it when it's ready.
Parts on hand: We stock common Snapper parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair (friction disc, belt): $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Snapper in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Tecumseh Engine Repair in Simpson & Greenville, NC

Tecumseh engines powered millions of walk-behind mowers, snow blowers, and outdoor power equipment for decades — and Rude Boy Small Engine Repair has been servicing them in eastern North Carolina for over 40 years. Whether your Tecumseh-powered mower won't start, surges at idle, or has lost compression, we know these engines inside and out. Honest diagnostics, fair pricing, and a 30-day satisfaction guarantee on every repair.

Common Tecumseh Engine Problems We Fix

Here's what brings most Tecumseh owners through our door:

Hard starting or no-start — carburetor, ignition coil, or compression issues
Surging or hunting at idle — common on Tecumseh carbureted engines
Oil leaks from gaskets, seals, or the crankcase
Carburetor flooding, gumming, or fuel delivery failure
Ignition coil failure and spark plug fouling
Valve train wear and compression loss
Governor issues causing runaway or low-power conditions
Fuel line cracking and primer bulb deterioration

Tecumseh-Powered Equipment We Service

We work on a wide range of equipment powered by Tecumseh engines:

Walk-behind push and self-propelled mowers
Snow blowers and snow throwers
Riding lawn tractors with Tecumseh engines
Tecumseh OHV, OHH, TVS, and TVXL series engines
Tillers, cultivators, and garden equipment
Pressure washers and generators with Tecumseh engines

Why Rude Boy for Tecumseh Repairs?

Tecumseh parts can be hard to find — we know where to get them and how to fix the engine right:

Tecumseh specialists: We've worked on Tecumseh engines for decades across dozens of equipment brands.
Honest diagnostics: We tell you exactly what's wrong and what it'll cost before we start.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: Can't haul it in? We'll come get it and bring it back when it's done.
No mystery charges: Flat, transparent pricing with no surprises at pickup.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Ignition coil replacement: $55–$85 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Tecumseh-powered equipment to Rude Boy and we'll get it running right — or we'll tell you honestly if it's not worth fixing.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Tuff Torq Transmission Repair in Simpson & Greenville, NC

Tuff Torq hydrostatic transmissions are found in some of the most popular riding mowers and lawn tractors on the market — including models from John Deere, Husqvarna, Craftsman, and Cub Cadet. When your mower loses drive, pulls to one side, or won't move, there's a good chance the Tuff Torq transmission is the culprit. Rude Boy Small Engine Repair diagnoses and services Tuff Torq transaxles right here in Simpson, NC. Honest pricing, straight talk, and a 30-day satisfaction guarantee.

Common Tuff Torq Transmission Problems We Fix

Here's what brings most owners in with Tuff Torq issues:

Loss of drive — mower won't move forward or reverse
Weak or sluggish drive — mower moves but lacks power
Pulling to one side while driving
Jerky or erratic movement in hydrostatic models
Transmission fluid leaks from seals or housing
Noisy operation — grinding, whining, or clunking sounds
Bypass valve stuck open (mower rolls freely, no drive)
Linkage and control rod issues affecting transmission engagement

Equipment with Tuff Torq Transmissions We Service

Tuff Torq transaxles are found in equipment from many major brands:

John Deere riding tractors and zero-turns
Husqvarna riding mowers and tractors
Craftsman riding tractors and lawn tractors
Cub Cadet riding mowers
Tuff Torq K46, K58, K62, and K66 transaxles
Any riding mower or tractor with a Tuff Torq hydrostatic drive

Why Rude Boy for Tuff Torq Repairs?

Transmission work requires experience — we have it:

Hydrostatic specialists: We diagnose and repair Tuff Torq transaxles across all major equipment brands.
Straight diagnosis: We tell you what's wrong and what it costs before we start.
30-day guarantee: All repairs backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Honest advice: If the transmission is beyond economical repair, we'll tell you that too.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed. Transmission repairs vary widely based on the issue.

Diagnostic fee: $57.50 + tax (credited toward repair)
Bypass valve service and fluid flush: $85–$130 + parts
Seal replacement and fluid service: $95–$175 + parts
Full transaxle replacement (unit cost varies by model)

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

If your riding mower has lost drive or is behaving strangely, bring it in or schedule a pickup — we'll get to the bottom of it fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Champion Generator Repair in Simpson & Greenville, NC

Champion Power Equipment makes some of the most popular portable generators in the country, and when yours won't start or won't hold a load, Rude Boy Small Engine Repair is here to help. We service Champion generators right here in Simpson, NC — from small inverter units to dual-fuel and whole-home standby models. Honest diagnostics, fair pricing, and a 30-day satisfaction guarantee on every repair.

Common Champion Generator Problems We Fix

Here's what brings most Champion owners through our door:

Generator won't start — carburetor, ignition, or low oil shutdown
Generator starts but won't produce power — AVR or alternator issues
Generator surging or hunting under load
Carburetor flooding, gumming, or fuel delivery failure from stale fuel
Low oil shutdown triggering even with adequate oil (sensor issues)
Dual-fuel models not switching between gas and propane properly
Electric start not working — battery, starter motor, or solenoid
Overload tripping or GFCI outlet faults

Champion Equipment We Service

We service the full Champion Power Equipment lineup:

Champion portable gas generators (3500W–12000W)
Champion dual-fuel generators (gas/propane)
Champion inverter generators
Champion open-frame and enclosed generators
Champion pressure washers
Champion log splitters and other outdoor power equipment

Why Rude Boy for Champion Generator Repairs?

Generator repairs require a shop that knows small engines and electrical systems:

Generator specialists: We diagnose both the engine and the electrical output side of your generator.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your generator and return it when it's ready.
Stale fuel service: We flush and clean fuel systems damaged by ethanol and old gas.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Electric start system repair: $75–$140 + parts
Full generator tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Don't wait until the next storm to find out your generator won't start. Bring it in for a service check or schedule a pickup today.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Lawn-Boy Mower Repair in Simpson & Greenville, NC

Lawn-Boy has been making reliable walk-behind mowers for generations, and Rude Boy Small Engine Repair has been fixing them just as long. Whether your Lawn-Boy won't start, won't self-propel, or is leaving an uneven cut, we'll diagnose it straight and fix it right. Honest pricing, no runaround, and a 30-day satisfaction guarantee on every repair.

Common Lawn-Boy Problems We Fix

Here's what brings most Lawn-Boy owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Self-propel not engaging or slipping on Personal Pace models
Surging or rough running at idle
Uneven cut or scalping from worn or bent blades
Carburetor flooding, gumming, or fuel delivery failure
Drive cable and wheel drive system issues
Deck vibration from worn spindle bearings
Oil leaks and excessive smoke from worn rings or seals

Lawn-Boy Equipment We Service

We work on the full Lawn-Boy lineup:

Lawn-Boy walk-behind push mowers
Lawn-Boy self-propelled mowers (Personal Pace and standard)
Lawn-Boy Insight and Sense series mowers
Older Lawn-Boy 2-stroke and 4-stroke models
Lawn-Boy commercial walk-behind mowers

Why Rude Boy for Lawn-Boy Repairs?

We've been fixing Lawn-Boy mowers for decades:

Lawn-Boy specialists: We know both the classic 2-stroke and modern 4-stroke Lawn-Boy engines.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your mower and return it when it's ready.
No pressure: If it's not worth fixing, we'll tell you straight.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Self-propel system repair: $65–$120 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Lawn-Boy in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Murray Mower Repair in Simpson & Greenville, NC

Murray mowers have been a staple in American yards for decades, and Rude Boy Small Engine Repair has been keeping them running in eastern North Carolina for over 40 years. Whether you have a Murray walk-behind, riding tractor, or zero-turn, we service the full lineup with honest pricing and a 30-day satisfaction guarantee.

Common Murray Problems We Fix

Here's what brings most Murray owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt issues
Uneven cut or scalping from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Deck spindle bearing failure and blade wobble
Self-propel system not engaging on walk-behind models

Murray Equipment We Service

We work on the full Murray lineup:

Murray walk-behind push mowers
Murray self-propelled mowers
Murray riding lawn tractors
Murray zero-turn mowers
Murray Select and Murray EZ series mowers

Why Rude Boy for Murray Repairs?

We know Murray equipment and we'll give you a straight answer:

Murray experience: We've worked on Murray mowers for decades, from classic walk-behinds to modern riders.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Murray and return it when it's ready.
Parts on hand: We stock common Murray parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Murray in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Simplicity Mower Repair in Simpson & Greenville, NC

Simplicity mowers are known for their quality construction and smooth ride — and when one needs service, you want a shop that knows them well. Rude Boy Small Engine Repair has been servicing Simplicity riding mowers and tractors in eastern North Carolina for over 40 years. From the Broadmoor to the Prestige and Regent, we service the full Simplicity lineup with honest pricing and a 30-day satisfaction guarantee.

Common Simplicity Problems We Fix

Here's what brings most Simplicity owners through our door:

Hydrostatic transmission issues — loss of drive, weak movement, or pulling to one side
Deck engagement failure — PTO clutch or belt wear
Hard starting or no-start on Briggs & Stratton or Kohler engines
Uneven cut from worn or bent blades and deck leveling issues
Steering problems on front-axle pivot models
Carburetor surging, flooding, or fuel delivery failure
Deck spindle bearing failure and blade wobble
Battery and charging system issues on electric-start models

Simplicity Equipment We Service

We work on the full Simplicity lineup:

Simplicity Broadmoor riding tractors
Simplicity Prestige and Regent models
Simplicity Courier and Conquest zero-turns
Simplicity walk-behind mowers
Simplicity snow blowers
Older Simplicity garden tractors

Why Rude Boy for Simplicity Repairs?

Simplicity equipment deserves a shop that takes it seriously:

Simplicity experience: We've worked on Simplicity mowers for decades across all major model lines.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Simplicity and return it when it's ready.
No upselling: We only recommend what your machine actually needs.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Hydrostatic drive service: $95–$175 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Simplicity in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

MTD Mower Repair in Simpson & Greenville, NC

MTD Products manufactures some of the most widely sold outdoor power equipment in the country — including brands like Cub Cadet, Troy-Bilt, Yard Machines, and White. Rude Boy Small Engine Repair has been servicing MTD-built equipment in eastern North Carolina for over 40 years. Whether it's a walk-behind, riding tractor, or zero-turn, we know these machines and we'll fix yours right. Honest pricing and a 30-day satisfaction guarantee.

Common MTD Problems We Fix

Here's what brings most MTD owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Self-propel system not engaging on walk-behind models
Deck spindle bearing failure and blade wobble

MTD Equipment We Service

We service MTD-built equipment across all their brands:

MTD walk-behind push and self-propelled mowers
MTD riding lawn tractors
MTD zero-turn mowers
MTD-built Cub Cadet, Troy-Bilt, and Yard Machines equipment
MTD snow blowers and tillers
MTD Pro commercial equipment

Why Rude Boy for MTD Repairs?

We know MTD equipment inside and out:

MTD platform experts: MTD builds equipment for many brands — we know the shared platforms and their common failure points.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Parts on hand: We stock common MTD parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your MTD equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Hustler Zero-Turn Mower Repair in Simpson & Greenville, NC

Hustler Turf Equipment builds some of the toughest zero-turn mowers in the industry — and when yours needs service, you want a shop that knows commercial-grade equipment. Rude Boy Small Engine Repair has been servicing Hustler zero-turns in eastern North Carolina for over 40 years. From the Raptor to the Super Z, we diagnose and repair Hustler mowers with honest pricing and a 30-day satisfaction guarantee.

Common Hustler Problems We Fix

Here's what brings most Hustler owners through our door:

Hydraulic drive issues — loss of power, pulling to one side, or weak wheel motors
Deck engagement failure — PTO clutch or belt wear
Hard starting or no-start on Kawasaki, Kohler, or Briggs engines
Uneven cut from worn or bent blades and deck leveling issues
Lap bar and steering control problems
Deck spindle bearing failure and blade wobble
Hydraulic fluid leaks from hoses, fittings, or pump seals
Battery and charging system issues on electric-start models

Hustler Equipment We Service

We work on the full Hustler Turf lineup:

Hustler Raptor and Raptor SD zero-turns
Hustler FastTrak and FastTrak SD models
Hustler Super Z and Super Z HD commercial zero-turns
Hustler X-ONE and Hustler Dash models
Hustler walk-behind mowers
Hustler stand-on mowers

Why Rude Boy for Hustler Repairs?

Commercial zero-turns need a shop that knows hydraulic systems:

Hydraulic specialists: We diagnose and repair the hydrostatic drive systems Hustler zero-turns depend on.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Hustler and return it when it's ready.
Commercial experience: We work on commercial-grade equipment daily.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Hydraulic system service: $95–$200 + parts
PTO clutch replacement: $120–$200 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Hustler in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Scotts Mower Repair in Simpson & Greenville, NC

Scotts lawn mowers were built on the same platforms as John Deere and other quality brands, making them solid machines worth repairing. Rude Boy Small Engine Repair services Scotts mowers right here in Simpson, NC. Whether it's a walk-behind or riding tractor, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Scotts Problems We Fix

Here's what brings most Scotts owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Self-propel system not engaging on walk-behind models
Deck spindle bearing failure and blade wobble

Scotts Equipment We Service

We work on the full Scotts mower lineup:

Scotts walk-behind push mowers
Scotts self-propelled mowers
Scotts riding lawn tractors
Scotts by John Deere models
Scotts Classic and Scotts 20 series mowers

Why Rude Boy for Scotts Repairs?

We know Scotts equipment and we'll give you a straight answer:

Platform knowledge: Scotts mowers share platforms with John Deere — we know both inside and out.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Scotts and return it when it's ready.
No pressure: If it's not worth fixing, we'll tell you straight.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Scotts mower in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

White Outdoor Mower Repair in Simpson & Greenville, NC

White Outdoor mowers were built on solid MTD platforms and earned a reputation for dependability. Rude Boy Small Engine Repair services White Outdoor equipment right here in Simpson, NC. Whether it's a riding tractor or walk-behind, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common White Outdoor Problems We Fix

Here's what brings most White Outdoor owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Deck spindle bearing failure and blade wobble
Self-propel system not engaging on walk-behind models

White Outdoor Equipment We Service

We work on the full White Outdoor lineup:

White Outdoor walk-behind push mowers
White Outdoor self-propelled mowers
White Outdoor riding lawn tractors
White Outdoor zero-turn mowers
White Outdoor snow blowers and tillers

Why Rude Boy for White Outdoor Repairs?

We know the MTD platform White Outdoor equipment is built on:

MTD platform experts: White Outdoor equipment shares platforms with MTD, Cub Cadet, and Troy-Bilt — we know them all.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Parts on hand: We stock common MTD-platform parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your White Outdoor equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Yard Machines Mower Repair in Simpson & Greenville, NC

Yard Machines is one of the most popular value-priced outdoor power equipment brands in the country, built by MTD Products. Rude Boy Small Engine Repair services Yard Machines mowers, snow blowers, and tillers right here in Simpson, NC. Honest diagnostics, fair pricing, and a 30-day satisfaction guarantee on every repair.

Common Yard Machines Problems We Fix

Here's what brings most Yard Machines owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Self-propel system not engaging on walk-behind models
Deck spindle bearing failure and blade wobble
Snow blower auger not turning or impeller issues

Yard Machines Equipment We Service

We work on the full Yard Machines lineup:

Yard Machines walk-behind push mowers
Yard Machines self-propelled mowers
Yard Machines riding lawn tractors
Yard Machines snow blowers (single and two-stage)
Yard Machines tillers and cultivators

Why Rude Boy for Yard Machines Repairs?

We know the MTD platform Yard Machines is built on:

MTD platform experts: Yard Machines shares platforms with MTD, Cub Cadet, and Troy-Bilt — we know them all.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Parts on hand: We stock common MTD-platform parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Yard Machines equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

MTD Huskee Mower Repair in Simpson & Greenville, NC

MTD Huskee riding tractors and mowers are built on the proven MTD platform and offer solid performance at an accessible price point. Rude Boy Small Engine Repair services Huskee equipment right here in Simpson, NC. Whether it's a riding tractor or walk-behind, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common MTD Huskee Problems We Fix

Here's what brings most Huskee owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Deck spindle bearing failure and blade wobble
Battery and charging system issues on electric-start models

MTD Huskee Equipment We Service

We work on the full MTD Huskee lineup:

Huskee walk-behind push mowers
Huskee self-propelled mowers
Huskee riding lawn tractors
Huskee zero-turn mowers
Huskee snow blowers and tillers

Why Rude Boy for MTD Huskee Repairs?

We know the MTD platform Huskee is built on:

MTD platform experts: Huskee shares platforms with MTD, Cub Cadet, and Troy-Bilt — we know them all.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Huskee and return it when it's ready.
Parts on hand: We stock common MTD-platform parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Huskee in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Yard-Man Mower Repair in Simpson & Greenville, NC

Yard-Man mowers were a staple brand from MTD Products for decades, known for solid construction and reliable performance. Rude Boy Small Engine Repair services Yard-Man equipment right here in Simpson, NC. Whether it's a riding tractor, walk-behind, or snow blower, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Yard-Man Problems We Fix

Here's what brings most Yard-Man owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Steering problems on riding tractors
Deck spindle bearing failure and blade wobble
Snow blower auger not turning or impeller issues

Yard-Man Equipment We Service

We work on the full Yard-Man lineup:

Yard-Man walk-behind push mowers
Yard-Man self-propelled mowers
Yard-Man riding lawn tractors
Yard-Man zero-turn mowers
Yard-Man snow blowers and tillers

Why Rude Boy for Yard-Man Repairs?

We know the MTD platform Yard-Man is built on:

MTD platform experts: Yard-Man shares platforms with MTD, Cub Cadet, and Troy-Bilt — we know them all.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Yard-Man and return it when it's ready.
Parts on hand: We stock common MTD-platform parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Yard-Man in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Columbia Mower Repair in Simpson & Greenville, NC

Columbia outdoor power equipment — built on the MTD platform — offers reliable performance at a great value. Rude Boy Small Engine Repair services Columbia mowers and equipment right here in Simpson, NC. Whether it's a walk-behind or riding tractor, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Columbia Problems We Fix

Here's what brings most Columbia owners through our door:

Hard starting or no-start — carburetor, ignition, or compression issues
Transmission slipping or loss of drive on riding models
Deck engagement failure — PTO clutch or belt wear
Uneven cut from worn or bent blades
Carburetor surging, flooding, or fuel delivery problems
Self-propel system not engaging on walk-behind models
Deck spindle bearing failure and blade wobble
Steering problems on riding tractors

Columbia Equipment We Service

We work on the full Columbia lineup:

Columbia walk-behind push mowers
Columbia self-propelled mowers
Columbia riding lawn tractors
Columbia snow blowers and tillers

Why Rude Boy for Columbia Repairs?

We know the MTD platform Columbia is built on:

MTD platform experts: Columbia shares platforms with MTD, Cub Cadet, and Troy-Bilt — we know them all.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Columbia equipment and return it when it's ready.
Parts on hand: We stock common MTD-platform parts to get your repair done faster.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Columbia equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Bad Boy Zero-Turn Mower Repair in Simpson & Greenville, NC

Bad Boy Mowers has built a loyal following with their heavy-duty zero-turn mowers at competitive prices. When your Bad Boy needs service, Rude Boy Small Engine Repair has the experience to diagnose it right and fix it fast. From the MZ Magnum to the Outlaw and Renegade, we service the full Bad Boy lineup with honest pricing and a 30-day satisfaction guarantee.

Common Bad Boy Problems We Fix

Here's what brings most Bad Boy owners through our door:

Hydraulic drive issues — loss of power, pulling to one side, or weak wheel motors
Deck engagement failure — PTO clutch or belt wear
Hard starting or no-start on Kawasaki, Kohler, Briggs, or Vanguard engines
Uneven cut from worn or bent blades and deck leveling issues
Lap bar and steering control problems
Deck spindle bearing failure and blade wobble
Hydraulic fluid leaks from hoses, fittings, or pump seals
Battery and charging system issues on electric-start models

Bad Boy Equipment We Service

We work on the full Bad Boy Mowers lineup:

Bad Boy MZ and MZ Magnum zero-turns
Bad Boy ZT Elite and ZT Avenger models
Bad Boy Outlaw and Outlaw XP commercial zero-turns
Bad Boy Renegade and Revolt models
Bad Boy Compact and CZT stand-on mowers
Bad Boy Maverick and Pup models

Why Rude Boy for Bad Boy Repairs?

Heavy-duty zero-turns need a shop that knows hydraulic systems:

Hydraulic specialists: We diagnose and repair the hydrostatic drive systems Bad Boy zero-turns depend on.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Bad Boy and return it when it's ready.
Commercial experience: We work on commercial-grade zero-turn equipment every day.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Hydraulic system service: $95–$200 + parts
PTO clutch replacement: $120–$200 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Bad Boy in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Bobcat Zero-Turn Mower Repair in Simpson & Greenville, NC

Bobcat Mowers — not to be confused with the construction equipment brand — builds serious commercial zero-turn mowers trusted by landscaping professionals. Rude Boy Small Engine Repair has been servicing commercial-grade zero-turns in eastern North Carolina for over 40 years. From the Bobcat ZT6000 to the ProCat and FastCat, we diagnose and repair Bobcat mowers with honest pricing and a 30-day satisfaction guarantee.

Common Bobcat Mower Problems We Fix

Here's what brings most Bobcat mower owners through our door:

Hydraulic drive issues — loss of power, pulling to one side, or weak wheel motors
Deck engagement failure — PTO clutch or belt wear on commercial decks
Hard starting or no-start on Kawasaki, Kohler, or Vanguard engines
Uneven cut from worn or bent blades and deck leveling issues
Lap bar and steering control problems
Deck spindle bearing failure and blade wobble
Hydraulic fluid leaks from hoses, fittings, or pump seals
Fuel system issues — carburetor, injector, or fuel pump failure

Bobcat Mower Equipment We Service

We work on the full Bobcat Mowers commercial lineup:

Bobcat ZT6000 and ZT7000 commercial zero-turns
Bobcat ProCat and FastCat Pro models
Bobcat Predator Pro commercial zero-turns
Bobcat stand-on mowers
Bobcat walk-behind commercial mowers
Older Bobcat Ransomes and Bunton commercial equipment

Why Rude Boy for Bobcat Mower Repairs?

Commercial zero-turns need a shop with real commercial experience:

Commercial specialists: We work on commercial-grade zero-turn equipment daily — not just residential mowers.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Bobcat and return it when it's ready.
Hydraulic expertise: We diagnose and repair the hydrostatic systems commercial mowers depend on.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Hydraulic system service: $95–$200 + parts
PTO clutch replacement: $120–$200 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Bobcat mower in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Dixon Zero-Turn Mower Repair in Simpson & Greenville, NC

Dixon zero-turn mowers were pioneers in the residential zero-turn market and built a strong reputation for quality and durability. Rude Boy Small Engine Repair has been servicing Dixon mowers in eastern North Carolina for over 40 years. Whether it's a classic Dixon ZTR or a later Husqvarna-era model, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Dixon Problems We Fix

Here's what brings most Dixon owners through our door:

Hydraulic drive issues — loss of power, pulling to one side, or weak wheel motors
Deck engagement failure — PTO clutch or belt wear
Hard starting or no-start on Kohler, Kawasaki, or Briggs engines
Uneven cut from worn or bent blades and deck leveling issues
Lap bar and steering control problems
Deck spindle bearing failure and blade wobble
Hydraulic fluid leaks from hoses, fittings, or pump seals
Battery and charging system issues on electric-start models

Dixon Equipment We Service

We work on the full Dixon zero-turn lineup:

Dixon ZTR classic zero-turn mowers
Dixon Grizzly and Ram zero-turns
Dixon Speed ZTR models
Dixon Kodiak commercial zero-turns
Later Dixon models built on the Husqvarna platform
Dixon walk-behind mowers

Why Rude Boy for Dixon Repairs?

We know Dixon zero-turns from the classic ZTR to the modern platform:

Dixon history: We've worked on Dixon mowers since the original ZTR days — we know every generation.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Dixon and return it when it's ready.
Hydraulic expertise: We diagnose and repair the hydrostatic systems Dixon zero-turns depend on.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Hydraulic system service: $95–$200 + parts
PTO clutch replacement: $120–$200 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Dixon in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Great Dane Zero-Turn Mower Repair in Simpson & Greenville, NC

Great Dane Mowers built a legendary reputation in the commercial landscaping world with their Super Surfer stand-on and Chariot zero-turn mowers. Rude Boy Small Engine Repair has been servicing commercial-grade zero-turns in eastern North Carolina for over 40 years. Whether it's a classic Great Dane or a later John Deere-era model, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Great Dane Problems We Fix

Here's what brings most Great Dane owners through our door:

Hydraulic drive issues — loss of power, pulling to one side, or weak wheel motors
Deck engagement failure — PTO clutch or belt wear on commercial decks
Hard starting or no-start on Kawasaki, Kohler, or Briggs Vanguard engines
Uneven cut from worn or bent blades and deck leveling issues
Lap bar and steering control problems on Chariot models
Deck spindle bearing failure and blade wobble
Hydraulic fluid leaks from hoses, fittings, or pump seals
Stand-on platform and control issues on Super Surfer models

Great Dane Equipment We Service

We work on the full Great Dane commercial lineup:

Great Dane Chariot and Chariot Jr. zero-turns
Great Dane Super Surfer stand-on mowers
Great Dane Surfer and Surfer Mag models
Great Dane Gateway walk-behind mowers
Great Dane Scamper and Scamper HP models
Later Great Dane models built on the John Deere commercial platform

Why Rude Boy for Great Dane Repairs?

Commercial mowers need a shop with real commercial experience:

Commercial specialists: We work on commercial-grade zero-turns and stand-ons daily — not just residential mowers.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your Great Dane and return it when it's ready.
Hydraulic expertise: We diagnose and repair the hydrostatic systems commercial mowers depend on.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Hydraulic system service: $95–$200 + parts
PTO clutch replacement: $120–$200 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Great Dane in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

RedMax Equipment Repair in Simpson & Greenville, NC

RedMax builds some of the most powerful handheld outdoor power equipment in the industry — from backpack blowers to trimmers and hedge trimmers trusted by professional landscapers. Rude Boy Small Engine Repair has been servicing RedMax equipment in eastern North Carolina for over 40 years. Whether your RedMax won't start, is losing power, or needs a full tune-up, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common RedMax Problems We Fix

Here's what brings most RedMax owners through our door:

Hard starting or no-start — carburetor, ignition coil, or spark plug issues
Loss of power or bogging under load
Carburetor surging, flooding, or fuel delivery failure
Fuel line cracking, primer bulb failure, or fuel filter clogging
Trimmer head not spinning or line feed problems
Blower fan housing cracks or impeller damage
Throttle cable and trigger assembly issues
Excessive vibration from worn anti-vibration mounts

RedMax Equipment We Service

We work on the full RedMax handheld lineup:

RedMax backpack blowers (EBZ series)
RedMax string trimmers and brush cutters
RedMax hedge trimmers
RedMax chain saws
RedMax pole saws and extended reach tools
RedMax handheld blowers and vacuums

Why Rude Boy for RedMax Repairs?

Professional-grade handheld equipment needs a shop that knows 2-stroke engines:

2-stroke specialists: RedMax runs Husqvarna-sourced 2-stroke engines — we know them inside and out.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Commercial experience: We work on professional landscaping equipment every day.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $55–$85 + parts
Full tune-up (handheld): starting at $69.99
Fuel system rebuild: $65–$95 + parts

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your RedMax equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Shindaiwa Equipment Repair in Simpson & Greenville, NC

Shindaiwa has earned a reputation among professional landscapers for building some of the most durable and powerful handheld outdoor power equipment available. Rude Boy Small Engine Repair has been servicing Shindaiwa trimmers, blowers, and chain saws in eastern North Carolina for over 40 years. Whether your Shindaiwa won't start, is losing power, or needs a full tune-up, we'll fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Shindaiwa Problems We Fix

Here's what brings most Shindaiwa owners through our door:

Hard starting or no-start — carburetor, ignition coil, or spark plug issues
Loss of power or bogging under load
Carburetor surging, flooding, or fuel delivery failure
Fuel line cracking, primer bulb failure, or fuel filter clogging
Trimmer head not spinning or line feed problems on T-series models
Blower fan housing cracks or impeller damage
Throttle cable and trigger assembly issues
Excessive vibration from worn anti-vibration mounts

Shindaiwa Equipment We Service

We work on the full Shindaiwa professional lineup:

Shindaiwa string trimmers and brush cutters (T-series)
Shindaiwa backpack and handheld blowers
Shindaiwa hedge trimmers
Shindaiwa chain saws
Shindaiwa pole saws and extended reach tools
Shindaiwa multi-tool systems

Why Rude Boy for Shindaiwa Repairs?

Professional-grade handheld equipment needs a shop that knows 2-stroke engines:

2-stroke specialists: Shindaiwa runs Echo-sourced 2-stroke engines — we know them inside and out.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Commercial experience: We work on professional landscaping equipment every day.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $55–$85 + parts
Full tune-up (handheld): starting at $69.99
Fuel system rebuild: $65–$95 + parts

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Shindaiwa equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

Billy Goat Equipment Repair in Simpson & Greenville, NC

Billy Goat Industries builds specialty outdoor power equipment that handles the tough jobs most machines can't — from debris loaders and vacuums to overseeder, aerators, and brush cutters. Rude Boy Small Engine Repair has been servicing Billy Goat equipment in eastern North Carolina for over 40 years. Whether it's a Force blower, a Plugr aerator, or a Hurricane debris loader, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common Billy Goat Problems We Fix

Here's what brings most Billy Goat owners through our door:

Hard starting or no-start on Honda, Briggs, or Kawasaki engines
Debris loader fan not spinning or impeller damage
Carburetor surging, flooding, or fuel delivery failure
Aerator tines worn, bent, or not engaging properly
Overseeder seed box jamming or drive system failure
Self-propel system not engaging on walk-behind models
Drive belt wear and belt tensioner issues
Brush cutter blade and deck issues

Billy Goat Equipment We Service

We work on the full Billy Goat specialty lineup:

Billy Goat Force debris blowers
Billy Goat Hurricane debris loaders and vacuums
Billy Goat Plugr aerators (hydraulic and mechanical)
Billy Goat overseeder and slit seeders
Billy Goat brush cutters and rough-cut mowers
Billy Goat sod cutters and trenchers

Why Rude Boy for Billy Goat Repairs?

Specialty equipment needs a shop with broad small engine experience:

Specialty equipment experience: We work on the full range of Billy Goat equipment, not just mowers.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Multi-brand engine knowledge: Billy Goat uses Honda, Briggs, and Kawasaki engines — we service all three.

Repair Pricing

Diagnostic fee is $57.50 + tax, applied toward repair if you proceed.

Diagnostic fee: $57.50 + tax (credited toward repair)
Carburetor service: $65–$95 + parts
Drive system repair: $75–$140 + parts
Full tune-up: starting at $89.99

We serve Simpson, Greenville, Winterville, Ayden, Farmville, and surrounding Pitt County communities.

Bring your Billy Goat equipment in or schedule a pickup — we'll get it diagnosed and back to you fast.

Rude Boy Small Engine Repair — Straight Talk, Solid Work.

DR Power Equipment Repair in Simpson & Greenville, NC

DR Power Equipment builds rugged, heavy-duty outdoor power tools for serious property owners — from field and brush mowers to chippers, log splitters, and stump grinders. Rude Boy Small Engine Repair has been servicing DR Power equipment in eastern North Carolina for over 40 years. Whether it's a DR Field & Brush Mower, a DR Chipper, or a DR Stump Grinder, we'll diagnose it straight and fix it right. Honest pricing and a 30-day satisfaction guarantee.

Common DR Power Problems We Fix

Here's what brings most DR Power owners through our door:

Hard starting or no-start on Briggs, Honda, or Kohler engines
Loss of power or bogging under heavy cutting loads
Carburetor surging, flooding, or fuel delivery failure
Drive belt wear and belt tensioner issues on self-propelled models
Blade and cutting head wear on field and brush mowers
Chipper knife and anvil wear or chipping drum issues
Log splitter hydraulic system leaks or weak splitting force
Self-propel system not engaging or wheel drive failure

DR Power Equipment We Service

We work on the full DR Power equipment lineup:

DR Field & Brush Mowers (walk-behind and tow-behind)
DR Chippers and wood chippers
DR Stump Grinders
DR Log Splitters
DR Rototillers and garden tillers
DR Leaf and Lawn Vacuums

Why Rude Boy for DR Power Repairs?

Heavy-duty property equipment needs a shop with real small engine depth:

Heavy equipment experience: We work on DR Power's full lineup — from brush mowers to log splitters.
Honest estimates: We diagnose first and give you a price before any work begins.
30-day guarantee: Every repair is backed by our satisfaction guarantee.
Pickup & delivery: We'll come get your equipment and return it when it's ready.
Multi-brand engine knowledge: DR Power uses Briggs, Honda, and Kohler engines — we service all three.